Triplett 9007-A Uživatelský manuál stáhnout pdf (Strana 35)

7.8

Continuity

Beeper:

WARNING!

Do not apply voltage or current to the meter when it is set to

the Diode Test / Continuity Beeper “ ” range.

7.8.1 Connect the black test lead to the COM jack and the red

test lead to the input jack indicated as on the “Front

Panel” drawing on page 22.

7.8.2 Set the RANGE switch to the Diode Test / Continuity

Beeper“ ” range.

7.8.3 Connect the test probes to the device or circuit to be

tested.

7.8.4 If the resistance of the device or circuit is less than 20 to

100 Ohms, the continuity beeper will sound.

Note: The reading displayed on the LCD

not an accurate indication

the resistance

the device

circuit being

measured.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

Žádné komentáře

Triplett 9007-A Uživatelský manuál Strana 35